Comparisons · Robot24.com Original

Cleanfix S170 Navi vs. OrionStar CleaniBot K1

Cleanfix S170 Navi and OrionStar CleaniBot K1 are autonomous commercial cleaning robots designed for indoor floor maintenance. We compare their dimensions, dust capacity, operating endurance, navigation and cleaning capabilities to examine their suitability for offices, hotels and commercial corridors.

October 21, 2026 by Business Desk Team

cleanfix-s170-navi-vs-orionstar-cleanibot-k1

Introduction

Autonomous floor cleaning robots assist companies with floor maintenance by eliminating the time their employees spend vacuuming and dust-mopping floors.

Which robot you choose will also depend on the area you need to clean, space and access. You also need to consider the size of dust capacity and the flooring that needs maintainence.

Cleanfix S170 Navi and Orion Star Cleani Bot K1 can clean the floors autonomously but they belong to different physical categories.

S170 Navi is a small robotic vacuum cleaner intended for programmed cleaning of carpets and hard floors in small rooms. Cleani Bot K1 is a commercial-sized cleaning robot intended for vacuum cleaning and dust-mopping of all accessible parts of the interior environment.

Based on ROBOT24.com market-research data records, this comparison examines their physical specifications, cleaning capabilities, endurance, navigation and suitability for commercial environments.

At A Glance

Metric	Cleanfix S170 Navi	OrionStar CleaniBot K1
Robot type	Low-profile commercial vacuum	Mid-size commercial vacuum/dust mop AMR
Best-fit use cases	Small-area programmed vacuuming of carpets and hard floors	Hotels, offices and commercial corridor cleaning
Dimensions	350 × 350 × 98 mm (Robot24 record)	660 × 525 × 718 mm (Robot24 record)
Load / suction / capacity	0.28 L onboard dust; 3.4 L collector	10 L dust bin
Runtime / charging	Up to 250 min; 5.5–6 h charging (Robot24 record)	8 h vacuuming / 4 h dust-mopping; 1.5 h charging (Robot24 record)
Navigation / sensing	LiDAR; ultrasonic and bump sensors; systematic patterns	Autonomous cross-zone scheduling; Wi-Fi/4G
Distinctive capabilities	Recommended 20–300 m²; up to 320 m²/charge; HEPA; FieldBots fleet controls	20 kPa suction; up to 700 m²/h; 440 mm main brush; auto-recharge
Key limitation / caveat	Not a wet scrubber; relatively small onboard bin \| Verification: S170 Navi has multiple physical/dock SKUs; OrionStar CleaniBot K1 is not an under-furniture low-profile counterpart.	Not low-profile: 718 mm height; not a direct under-furniture substitute

How They Compare

Operational role and commercial cleaning

Cleanfix S170 Navi is intended for programmed vacuuming of carpets and hard floors in commercial indoor facilities.

Its optimal cleaning size 20-300 m² is appropriate for smaller offices, meeting rooms, as well as other commercial spaces that require frequent floor cleaning.

Orion Star Cleani Bot K1 is ready to be used in commercial cleaning tasks, in hotels, offices and hallways.

Relative to S170 Navi, which is dedicated to vacuuming, Cleani Bot K1 offers the solution for both vacuuming and dust-mopping.

Both robots perform regular and simple maintenance cleaning of floors, but they differ in cleaning capabilities and size, which means they are designed to operate in different locations.

Physical dimensions and accessibility

The height of the two robots sets them apart the most.

Cleanfix S170 Navi - 017 000 Tall 98 mm in the 017.000 version Tall 97 mm in the 017.010 version.

The top of Orion Star's Cleani Bot K1 stands at 718 mm, which is over seven times taller than the Cleanfix.

This variation has implications in commercial cleaning.

S170 can clean under work desks, cabinets and other furniture if there is enough space underneath.

Cleani Bot K1 is most suitable for reachables pace like corridors and open places.

DUST CAPACITY & MAINTENANCE

Cleanfix S170 Navi has a 0.28 L onboard dust container.

017.000 = 3.4 L docking dust collector 017.010 = 2.5 L collector has been recorded. The have The have 3.4 L and 2.5 L coil has been documented.

These specifications are for separate product codes and should not be merged together into the same configuration.

Orion Star Cleani Bot K1 Dust bin contains 10L that is relatively bigger than previous one.

As a result of its larger onboard capacity, emptying the dust-bin might not need to be done as often when doing a longer clean, but will be influenced by the volume and types of debris collected.

The cleaning dock collector system used by Cleanfix also plays a role in the management of its maintenance, so the two systems should be compared on total dust management, not capacity alone.

Runtime and charging

Cleanfix S170 Navi has a stated operating runtime of up to 250 minutes, equivalent to approximately four hours and ten minutes.

Charging Time 5.5-6 hours (recorded).

Orion Star Cleani Bot K1 can work for eight hours when vacuuming, four hours when dust-mopping, and it takes about 1.5 hours to charge.

Cleani Bot K1 has the longer claimed vacuuming time and the shorter recorded charging time.

However the number of calculated g/ kWh seems to reflect slightly different operating conditions, cleaning methods and manufacturer's test procedures.

Actual endurance will vary according to the type of floor, the intensity of cleaning, the distance of the route and the amount of time out.

Coverage and performance when cleaning

Cleanfix suggests S170 Navi for space 20-300 m² with coverage of 320 m² per charge (max).

Cleani Bot K1 shows a maximum cleaning productivity of 700 m²/h.

Also, this model claims a suction of 20 kPa and has a 440 mm main brush.

As detailed above, these specifications cater towards the K1 being used in larger commercial spaces.

But, the coverage-per-charge number in Cleanfix vs. the hourly productivity rate in Orion Star are different metrics and shouldn't be like-for-like performance figures.

During site trials, cleaning area, floor condition and quality should be checked to determine performance in practice.

Navigation and obstacle avoidance

Cleanfix S170 Navi employs LiDAR, ultrasonic, and bump sensors to steer throughout the room and execute a specified pattern.

It will also assist programmed vacuuming in mapped locations.

Orion Star Cleani Bot K1 manages automatic cross-zone planning through which the system distributes cleaning tasks across specified areas.

The robot also has Wi-Fi 4G connection saved.

Both robots are designed for autonomous operation inside; howver, their positioning accuracy will be affected by the structure of a building, objects and pedestrians passing through the cleaning zone.

Confirm the specific sensor arrangement used in Cleani Bot K1 with product manufacturer's technical literature.

Fleet management and connectivity

Cleanfix S170 Navi manages fleet with Field Bots.

May be relevant to operators engaged in scheduled cleaning tasks in commercial cleaning environments or who are operating more than one robot.

Cleani Bot K1 can connect to Wi-Fi, 4G, or schedule to vacuum in a specific zone all on its own.

These features might also provide additional support for the facilities that need cleaning in various different areas or on another shift.

But, internet access isn't the same thing as equal fleet-management.

Operators should identify the context sensitive help, reporting functions, the available scheduling controls and the available time and date controls.

Maintenance and deployment considerations

S170 Navi is not a wet scrubber or a dust-mopping robot.

Its lower profile can be advantageous in offices with furniture and tight spaces and its onboard dust collection canister, just like a corded vacuum's collection bag, means the docking collector becomes part of daily maintenance.

K1 Cleani Bot K1 offers both dust vacuuming and dust mopping, with an increased dust bin size and automatic battery charging.

This could allow for extended cleaning schedules on any accessible commercial floors.

Prior to using, operators should verify floor compatibility, doorway clearance, consumable needs, charging setup and onsite technical support.

Summary

Cleanfix S170 Navi and Orion Star Cleani Bot K1 can be autonomous commercial floor cleaners, their physical size, cleaning capabilities and working capacities are for different needs.

Cleanfix S170 Navi could be a candidate for compact commercial settings with low-clearance entries and programmable vacuuming. Its around 98 mm in height, HEPA filtration, dust collection at the dock and Field Bots fleet management could help maintenance cleaning of offices and other tight interior spaces.

Orion Star Cleani Bot K1 may be better suited to you if you need larger dust capacity, vacuuming/dust-mopping, and longer run times which are all relevant to larger accessible floors: Large dust bin of 10 L, 20 kPa stated suction, 440 mm main brush, auto recharging.

Depends upon total floor space, clearances for furniture, cleaning needs, hours of operation and ability to maintain the platform.

Data reflected in this comparison is from ROBOT24.com market-research data records and manufacturer specifications as opposed to performance testing. Product configurations, cleaning productivity, navigation reliability and maintenance needs are all to be verified from manufacturer documentation and on-site testing.