News Ticker-
Comparisons · Robot24.com Original

EngineAI SE01 vs. AGIBOT RAISE A1

EngineAI SE01 and AGIBOT RAISE A1 are full-size humanoid robots targeting manufacturing, logistics and research. Based on ROBOT24.com market-research data records, this comparison examines their differences in degrees of freedom, speed, payload, autonomy, perception, compute and manipulation capability.

engineai-se01-vs-agibot-raise-a1

Introduction

EngineAI SE01 and AGIBOT RAISE A1 are both represented in the ROBOT24.com market-research data records and are compared here using their recorded specifications and use cases.

EngineAI SE01 is recorded as a full-size bipedal humanoid, with use cases including manufacturing, logistics, research and education. AGIBOT RAISE A1 is recorded as a full-size bipedal humanoid, with use cases including manufacturing, logistics, research and inspection.

The main documented differences are in their physical configuration, performance figures, autonomy stack, payload capacity and the level of technical detail available in the ROBOT24.com market-research data records.

At a Glance 

MetricEngineAI SE01AGIBOT RAISE A1
Robot typeFull-size bipedal humanoidFull-size bipedal humanoid
Use casesManufacturing; logistics ; research; educationManufacturing; logistics ; research; inspection
Height / dimensions170 cm175 cm
Weight55 kg55 kg
Degrees of freedom32 DOF49+ DOF
PayloadNot recorded5 kg per arm; up to 80 kg total lift
Maximum speed2 m/s7 km/h
Runtime~2 hoursNot recorded
NavigationAutonomous navigation; dynamic balance; human-like gaitAutonomous navigation; human-scale operation
Sensors360 deg LiDAR; Intel RealSense D435; 6 stereo cameras; IMULiDAR; RGB-D cameras; microphone array; IMU; force/torque; proximity sensors
Special capabilityNVIDIA + Intel processors; reinforcement/imitation learning; ROS-compatible SDK200 TOPS; five-finger SkillHand ; EI-Brain; WorkGPT ; ROS 2
AvailabilityCommercially availableNot recorded
PriceUS$20,000-30,000Approx. US$30,000

How They Compare

In terms of role, EngineAI SE01 is recorded for manufacturing, logistics, research and education, while AGIBOT RAISE A1 is recorded for manufacturing, logistics, research and inspection. Their strongest overlap is in manufacturing, logistics and research, while the ROBOT24.com market-research data records show different emphasis in their additional applications.

On the recorded performance figures, both robots weigh 55 kg. Maximum speed is recorded as 2 m/s for EngineAI SE01 versus 7 km/h for AGIBOT RAISE A1. Runtime is approximately two hours for EngineAI SE01, while no corresponding figure is recorded for AGIBOT RAISE A1.

Capacity also differs in the ROBOT24.com market-research data records. EngineAI SE01 has no recorded payload figure, whereas AGIBOT RAISE A1 is listed with a 5 kg payload per arm and up to 80 kg total lift capacity.

For autonomy and perception, EngineAI SE01 is recorded with autonomous navigation, dynamic balance and human-like gait, supported by 360° LiDAR, an Intel RealSense D435, six stereo cameras and an IMU. AGIBOT RAISE A1 is recorded with autonomous navigation and human-scale operation, supported by LiDAR, RGB-D cameras, a microphone array, IMU, force/torque sensing and proximity sensors.

Summary

EngineAI SE01 and AGIBOT RAISE A1 occupy the same broad full-size humanoid category, but their ROBOT24.com market-research data records differ across degrees of freedom, locomotion, payload, compute, perception and manipulation capability. The figures above should be read as a direct comparison of the specifications currently stored in ROBOT24.com market-research data records rather than as a broader market assessment.

Free Weekly

BUSINESS NEWS WEEKLY LETTER

The Weekly Letter for Robotics Professionals, Summarizing the Most Important Industry Moves, Launches, Deals and Signals.